The perfect dose of aggression for the BMW G2X 330i/430i.

Track Edition:

Beginning after the secondary catalyst, the Track Edition picks up right before the rear axle and provides a full single 3” route from this point and splits to dual 3” tip outlets. The Track Edition has absolutely zero filter, making its sole purpose to increase the volume out of the B48 engine while remaining completely 50-state emissions compliant. 

A simple cut at the factory cut point is all it takes, and the Track Edition goes into place via four bolt-on components. We include a factory clamp for the cut point that allows drivers to easily swap back to their stock rear section if ever needed.

Touring Edition:

The Touring Edition shares the same real estate as it’s Track Edition sibling, with the primary differentiator being the implementation of AWE’s patented drone-canceling 180 Technology®. 

Given the straight-through design and lack of packing material, the 180 Technology® resonators’ job is to defeat drone prone frequencies that would otherwise be experienced within the cabin. Maximum flow is maintained and exterior volume is increased, just as it would if it were a Track Edition, with the interior experience being much more sophisticated and tame.

Sound Perfection: 180 Technology® by AWE:
As exhaust gasses exit the B48 engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. Call it science, call it magic, or call it 180 Technology® by AWE. 

(Critical intel–please read) Which option should you go with?

Due to the structural differences between the 330i and 430i, we recommend the following configurations:

330i: With all factory emissions equipment in place, the Track Edition is recommended for those wanting an elevated exhaust experience from within the cabin. If you plan to upgrade anything further upstream, consider the Touring Edition. Otherwise, the Touring Edition will resemble stock from within the cabin.

430i: Given the coupe design of the 430i, interior acoustics differ when compared to its sedan sibling, with new frequencies making their way into cabin. Due to this, and with all factory emissions equipment in place, we recommend equipping the Touring Edition to ensure an enjoyable driving experience. Drivers can, of course, equip a Track Edition, but it may be much for some, especially if anything upstream has been changed. You’ve been warned.

Tip Options:

AWE Touring and Track Editions come standard with dual 4.5” double-walled, slash-cut tips available in chrome silver or diamond black.

 
What’s in the box?

Complete AWE Touring or Track Edition Axleback Exhaust, AWE valve simulator, two slash-cut tips in chosen finish, factory 85mm sleeve clamp, hangar locking collars, and all required hardware for installation.

You've got questions? We've got answers. Click "ask an expert" at the top of this page.
 

Download Installation Instructions: AWE Axleback Exhaust for G2X BMW 330i/430i.

What is 180 Technology®?

AWE's patented 180 Technology® works a little something like this: As exhaust gases exit the engine and flow into an AWE 180 Technology®-equipped resonator, they pass through strategically located ports, and into reflection chambers.

Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. Depending on the sound requirements of each vehicle, AWE acoustic engineers adjust the size and location of the ports and the chambers. By controlling the size and location of these key elements, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

Consistency through change.

AWE 180 Technology® is not on a “one size fits all” concept. Rather, AWE engineers design sound cancelation resonators based upon the specific acoustics generated by vehicle types, thereby ensuring perfect sound, every time. It’s one of the reasons AWE exhausts have earned a reputation for the perfect tone, regardless of application.

What it means to you.

The result? The removal of unwanted tones in all AWE 180 Technology®-equipped exhaust systems. The sound produced by this formula is the perfect, signature note. Unlocked performance and spot-on tone, every time.

A video’s worth 1,000,000 words.

180 Technology® in action, below.

Questions about AWE's patented 180 Technology®? We're here.

Lifetime Exhaust Warranty

SUMMARY

The AWE Lifetime Exhaust Warranty on select AWE exhaust products protects against manufacturer defects. Manufacturer defect is defined as any characteristic of the product which hinders its usability for the purpose for which it was designed and manufactured. The warranty against manufacturer defects doesn’t cover any cosmetic changes, or normal use wear and tear. All warranties cease at a product’s discontinuance.This applies only to AWE brand exhaust tubing, welding, flex areas.

COVERED

Original owner.

PERIOD

• AWE brand exhausts: Tubing, welding, flex areas: Lifetime
• Valves on exhausts: Three-years on mechanical components, one year on valve motors
• Electronics / Electronic Components found on any product: One year*
• Catalysts: One Year
• Tip finish defects (please follow washing instructions prior to contacting support): One year (see Tip Finish below)
• Intakes (all components): One year
• Filters: One year
• Intercoolers: One year
• Other: Foilers, accessories, tools, valances, drive train stabilizers, suspension components: One year
• Turbo kits/turbochargers: Not covered under warranties, special order item.

ACTION

Repair, replace or consult toward resolution at AWE’s discretion.

LABOR

Not covered.

SHIPPING

Customer is responsible for all shipping costs.

RESTOCKING FEE

n/a

EXCLUSIONS

See above

The AWE No CEL (Check Engine Light) Guarantee is noted on certain AWE products, and offers peace of mind against the appearance of Check Engine Lights when products are installed properly and used as intended, on vehicles with no additional modifications, with the exception of other AWE products intended to work with the product in question.

COVERED

Original owner.

PERIOD

One year from date of new product purchase (proof of purchase required).

ACTION

Repair, replace or consult toward resolution at AWE’s discretion.

LABOR

Not covered.

SHIPPING

Customer is responsible for all shipping costs. If AWE deems the item to be defective and the item is either repaired or replaced by AWE, shipping within the US is covered by AWE.

RESTOCKING FEE

There is no restocking fee.

EXCLUSIONS

Only applicable to products where it is clearly stated as such on www.AWE-Tuning.com.

All AWE brand products have a fitment guarantee. This is our pledge to have made products that perfectly fit, for easy installation by a qualified installer.

COVERED

Original owner.

PERIOD

30 days from purchase date, with proof of purchase.

ACTION

Consultation toward resolving installation issues. Should AWE deem that installation issue is due solely to a manufacturing defect, AWE will issue a replacement product or portion of product, free of charge.

LABOR

Labor is not covered.

SHIPPING

If claim is determined by AWE at its sole discretion to be a manufacturer defect, AWE will cover two-way shipping to AWE either from consumer or dealer, and back to either consumer or dealer. AWE may also request a “Destroy in Field” of any defective parts.

RESTOCKING

No restock fee for Manufacturer Defect.

EXCLUSIONS

No exclusions.